CM Features

	Aluminum Cabinet: The CeilMate^TM is manufactured from aluminum for light weight, corrosion resistance and aesthetics. The cabinet is structurally reinforced throughout to provide a stable and secure platform for the air conditioning components. The unit’s evaporator section is insulated with high density, 2 lb/ft² thermal and acoustical insulation and sealed with self-extinguishing gasket material. Panels are fastened with quick release hardware to simplify internal access.
	Scroll Compressor: All D.X. systems, 1-¹/2 ton and larger (CM-18 thru CM-36) incorporate scroll compressors for high reliability, high efficiency and low noise. CM-12, one refrigerant ton, systems include the latest generation in reciprocating compressors. Compressors are mounted on vibration isolators to minimize noise transmission to the cabinet.
	A-Frame Coil: The unit has a large face area coil to increase cooling efficiency, reduce power consumption. The copper tube, aluminum fin coil is mounted in a stainless steel condensate pan; the condensate line is piped to the outside of the cabinet. A condensate safety switch guards against condensate overflow.
	Large, Low RPM blower: The CeilMate^TM incorporates a three speed direct drive blower motor in a draw-thru configuration for even air distribution across the coil . The large blower runs at a low rpm to minimize air noise and motor horse power consumption. The blower assembly is mounted to an internal chamber to further reduce noise levels.
	Electrode Canister Humidifier: Integrated with the CeilStat^TM, the humidifier provides humidification to your facility. An optional electrode canister is available providing state-of-the-art humidity control. The humidifier senses cylinder current draw, automatically flushing and filling the cylinder to control the mineral content of the water and humidity output The output is field adjustable from 1 to 5 lbs/hr. A "Change Cylinder" light alerts service personnel when the humidifier output requires service.
	Nichrome Heater: Electric reheat is designed to offset the cooling effect of the dehumidification cycle; electric heat provides resistance heat regardless of the dehumidification cycle. The unit incorporates a factory installed, wired and tested nichrome wire heater. The heater has low voltage thermal safety cutouts, one pilot duty automatic resettable and a second power line fuse-link (over-temperature) safety device for each bank of heat.
	UV Sterilization light: The unit incorporates a high intensity UV light to sterilize the air passing through the coil. As airborne mold bacteria are exposed to the UV light they are killed, preventing them from depositing active contaminants on the coil surface, the condensate pan and other internal surfaces. As the air is changed several times in the conditioned room, the contaminants are constantly being reduced in number.
	Electronic Thermostat/Humidistat The CeilStat^TM temperature and humidity controller incorporates temperature and humidity control in an attractive, wall mounted unit. This line powered, backlit system incorporates several salient features: * Manual override * 7 day programming * Programmable Fan * Adjustable Differential * Compressor Short Cycle Protection * Air Filter Monitor * 4 Hour reserve for settings * Status Indicators * Independent humidify and dehumidify control * Hidden Service Level * Condensation Control In Pan Condensate pump The condensate pump is factory mounted in the unit's stainless steel condensate pan, wired and piped to the outside of the cabinet. In the event the condensate pump can not remove the condensate fast enough, an emergency condensate pan locks out the cooling system until the pump has drained the condensate pan.
	High Pressure Glycol/Water Systems Water cooled systems are available with factory installed, tested and adjusted 2-way water regulating valves, rated for 350 psi w.w.p, to maintain proper refrigerant head pressure. 500 psi valves are also available.
	Internet Accessible Thermostat/Humidstat The CeilStat II temperature and humidity controller incorporates temperature and humidity control in an attractive, wall mounted unit. This line powered, backlit system incorporates several salient features: * Internet Connectivity for monitoring, management and configuration capability (requires secure customer internet access) * Easy installation * Backlit Graphic LCD display * EnergyStar Compliant * FCC Class B Compliant * Failsafe Temperature Switch * Adjustable Differential * Compressor Short Cycle Protection * E-Mail or Text Messaging Fault reporting * Status Indicators * Independent humidify and dehumidify control * Hidden Service Level Alarms * Air Filter Monitor * Over/Under Temperature Alarm * High Humidity alarm * Customer selected contact closure