THDC-() LX Series Condensing Systems
THDC LX Series centrifugal condensing systems are used in critical cooling applications needing horizontal condenser air discharge and inlet on the same face.
Features
- Twin direct drive blowers on selected models
- Available with 410A refrigerant
- High Efficiency scroll compressor
- Safety pressure switches
- Heavy gauge powder coated cabinet
- Service valves
- Single or three phase power options
- Other select options also available
- Every system factory tested before shipment
- High Efficiency Scroll Compressor
- Advanced Coil Design
- Powder Coated Cabinet
- Powder Coated CNC Punched Safety Screen
- Over Sized Direct Drive Blower
- Two Screw Blower Slide Out
- Non Corrosive Hardware
- High / Low Pressure Switches
- Low Ambient Speed Control (Down To 20 Degrees)
- 4 lbs. Acoustical ArmaFlex Lined Cabinet
- Vibration Eliminators (Liquid & Suction)
- Heavy Duty Compressor Sound Blanket
RGA Series
Models |
Dimensions HxWxD (inches) |
Cooling @ 80/67 & 95°F Ambient |
SEER Minimum tested and certified |
THDC-18 |
23 x 29.6 x 18.5 |
18,900 |
12 |
THDC-24 |
23 x 29.6 x 18.5 |
24,500 |
12 |
THDC-30 |
23 x 29.6 x 18.5 |
27,700 |
12 |
SGA Series
Models |
Dimensions HxWxD (inches) |
Cooling @ 80/67 & 95°F Ambient |
SEER Minimum tested and certified |
THDC-18 |
28.625 x 26 x 18.6 |
18,800 |
12 |
THDC-24 |
28.625 x 26 x 18.6 |
23,900 |
12 |
THDC-30 |
28.625 x 26 x 18.6 |
29,000 |
12 |
TGA Series
Models |
Dimensions HxWxD (inches) |
Cooling @ 80/67 & 95°F Ambient |
SEER Minimum tested and certified |
THDC-18 |
32 x 23.75 x 18.6 |
19,000 |
12 |
THDC-24 |
32 x 23.75 x 18.6 |
24,100 |
12 |
THDC-30 |
32 x 23.75 x 18.6 |
28,400 |
12 |
Equipment was tested and certified by an independent third party to AHRI 210/240 and DOE standard 10 CFR Part 430 (Energy or Water Conservation Program for Consumer Products) and the Energy Policy and Conservation Act, as amended. Test results and reports are available on AHRI's website,
www.ahridirectory.org or DOE's CCMS website.